The Heart of It: Stencilled Calico Panel by Lynne Moncrieff

11:00

Hello


This week, I am sharing a stencilled calico hanging.

That's Crafty! Mandala Stencil is such a favourite of mine, especially stencilling with Texture Paste onto calico.  I wanted to use this stencil with paste onto three different sized calico panels, forming them into hangings.

The other two panels can be seen in an article in the latest issue of Somerset Studio.

Supplies

That's Crafty! Clear Stamp Set Lynne's Affirmations Set 6
That's Crafty! Surfaces Mixed Media Paper/Card Kit (Calico, Corrugated Cardboard)
That's Crafty! Mandala Stencil TC8014
That's Crafty! Texture Paste
That's Crafty! Surfaces MDF Heart Pack of 12 2x3.5
That's Crafty! Multi-Surface Paint: Antique Gold
Plaid Folkart Rust Finish Kit 
Archival Ink Designer Series Potting Soil
Gesso
Extras: twig, rusted washer, rusted large safety pin, button, brown thread, small shipping tag, yarn, vintage ribbon scrap, coffee granules, water, old roasting tin

Instructions


Begin by tearing calico to required length.  Stencil Mandala with Texture Paste. I focused my attention on the central element of the Mandala stencil and began in the middle of the calico panel.  Once this was stencilled, I carefully moved the stencil, aligning it above the central stencilled area and finally, below the central stencilled area.  

To achieve a distressed effect, I ensured I did not apply Texture Paste to the full central design of the stencil.

Once dry, time to stain the panel. Dissolving coffee granules in an old roasting tin, I then submerged the stencilled panel. Then removing and drying on flat, absorbent surface. Keep in mind that the calico will dry lighter.


Prepare the MDF heart by first applying the Rust Finish Kit. Once this is dry, lightly highlight texture with the gorgeous Antique Gold Multi-Surface paint from That's Crafty! This will be adhered to the calico panel, with a small, also coffee stained shipping tag, suspended below the tag but first, ink up Affirmation, stamping directly onto tag. Adhere this to panel, embellishing heart with button threaded with twine and wrapping the tag string around the heart. Adhere rusted washer to hole of tag.


For the upper edge of the panel, a scrap of vintage linen ribbon, stitched to large rusted safety pin.  
To the panel, I added other elements, really from found items I have which have been rusted. A washer which I wrapped with nettle yarn, the same yarn wrapped around a twig, 


and a wee scrap of stained calico, stitched with primitive cross stitch to panel.


If I was working on the MDF heart now, I would substitute the Rust Finish Kit with That's Crafty! Sand Texture Paste, Multi-Surface Paint Chestnut Brown and a hint of Black paint.

You Might Also Like

4 comments

  1. I love all the wonderful details, here, the safety pin holding it, the branches, the way you have used the cord around the ring, the stunning heart and of course the stenciled fabric - so beautiful coffee stained . A gorgeous art piece dear friend. <3 xxx

    ReplyDelete
  2. Such beautiful texture from the stencilling Lynne and love the rusty heart with all the wonderful found items you've added.
    Fliss xx

    ReplyDelete
  3. oh I love this Lynne . The length, how it hangs , the texture , the rust , the overall organic feel - its a joy .
    x

    ReplyDelete
  4. Thank you Dorthe, Fliss and Amanda for your lovely words for this latest project.
    Wishes
    Lynne

    ReplyDelete

Thank you for taking the time to leave a comment on our blog, we really appreciate it.

Note: only a member of this blog may post a comment.

Related Posts Plugin for WordPress, Blogger...

Like us on Facebook